Compare Quotes & Save up to 33%

Compare Quotes & Save up to 33%

Get up to 3 quotes from pros in your postcode

1. Do you require a local plumber?*

Powered by Bark.com

Boiler Losing Pressure? 7 Causes & Fixes For 2026

If your boiler keeps losing pressure, it's usually down to a leak somewhere in the system, a faulty pressure relief valve or a failing expansion vessel. Sometimes it's simply because you've just bled the radiators. Most combi and system boilers should read between 1 and 1.5 bar when the heating is cold and up to about 2 bar when it's running.

Teal graphic with a house outline and the words Boiler Losing Pressure Seven Causes And Fixes

Here are the seven most common causes, what you can check yourself and when to call in a Gas Safe engineer.

Comparing Quotes Could Save Up To 33%:

→ Click To Get Quotes

What's Normal?

Gauge reading What it means
Below 0.5 bar Too low, boiler may lock out
1 to 1.5 bar cold Normal
Up to about 2 bar hot Normal when the heating is on
Over 3 bar Too high, relief valve may open

Check your boiler manual, as exact figures vary by model.

How To Repressurise Your Boiler

  1. Turn the boiler off and let it cool.
  2. Find the filling loop, usually a braided hose with two valves under the boiler.
  3. Open both valves slowly. You'll hear water flowing.
  4. Watch the gauge and close the valves at about 1.2 to 1.5 bar.
  5. Turn the boiler back on and reset it if needed.

Some boilers have a built in key or lever instead of a hose. Follow your manual.

7 Causes Of Pressure Loss

1. You've just bled the radiators

Bleeding releases air and a little water, so pressure drops. Top it up and it should stay put.

2. A leak in the pipework

Look for damp patches, stains on ceilings, puddles under radiators and corrosion around valves. Pipes under floors are harder to check. A tiny leak can lose pressure over days.

3. A leaking radiator valve

Valves often weep slowly. Wipe each valve with dry tissue and check for moisture.

4. Pressure relief valve

This valve opens to release water if pressure gets too high. If it's faulty, it can drip constantly. Check the small copper pipe that runs outside from the boiler. If it's dripping, the valve may need replacing.

5. Expansion vessel

The expansion vessel absorbs the extra volume when water heats up. If it loses its air charge, pressure rises sharply when hot, the relief valve opens and pressure then drops when cold. An engineer can recharge or replace it.

6. Overfilling

If you fill to 2 bar or more cold, the pressure may hit 3 bar when hot and the relief valve will open. Fill to the level your manual says.

7. Internal boiler leak

Water inside the boiler casing is a job for a Gas Safe engineer only. Don't remove the casing yourself.

Typical Repair Costs

Repair Typical cost
Engineer call out and diagnosis £60 to £120
Pressure relief valve replacement £150 to £250
Expansion vessel recharge £60 to £120
Expansion vessel replacement £200 to £400
Radiator valve replacement £80 to £150
Leak find and repair £100 to £400

Typical UK ranges, checked October 2026.

When Is It Time For A New Boiler?

If your boiler is over 15 years old and keeps losing pressure, repeated repairs can cost more than replacement. A modern condensing boiler is also more efficient. See our new boiler cost guide for prices.

Safety First

Never open the boiler casing or attempt repairs on gas parts unless you're Gas Safe registered. If you smell gas, turn off the supply at the meter, open windows and call the National Gas Emergency number on 0800 111 999.

How To Find A Hidden Leak

Start with the obvious places. Check every radiator, valve and visible pipe. Look at ceilings below bathrooms and under the boiler. Then check outside where the relief valve pipe exits the wall. If you find nothing, an engineer can use pressure tests, thermal imaging or acoustic tools to trace a leak under floors or inside walls. It's worth paying for: a slow leak can rot timber and damage ceilings over time.

Can You Keep Topping It Up?

You can as a short term fix, but don't make it a habit. Each top up brings in fresh water containing oxygen, which speeds up corrosion inside radiators and pipes. It also dilutes the inhibitor that protects the system. If you're refilling more than once every few months, get the fault found and fixed.

FAQs

How often should I top up boiler pressure?

Ideally rarely. If you need to top it up more than once every few months, there's probably a fault.

Is low boiler pressure dangerous?

Not usually. The boiler will lock out to protect itself. It's more an inconvenience.

Can high pressure damage a boiler?

The relief valve protects it, but constant high pressure wears parts. Get it checked.

Why does pressure go up when the heating is on?

Water expands when heated. A small rise is normal.

Need An Engineer?

Use the form at the top of this page to find a local Gas Safe engineer or plumber.

Checked October 2026. Costs are typical UK ranges.