New Boiler Cost 2026: Combi & System Prices UK
A straightforward like for like combi boiler replacement usually costs £2,500 to £4,000 fitted in the UK, according to Checkatrade's 2026 cost guide. Homeowners reporting their own prices to WhatPrice give a similar average of about £2,800 for a new combi including fitting. Switching boiler type, moving the boiler or adding a new cylinder pushes the bill higher, and Checkatrade puts the full range for supply and installation at £3,000 to £15,000 once more complex jobs and fuel types are included.

Boilers usually last 10 to 15 years, so most households only buy two or three in a lifetime. That makes it hard to know whether a quote is fair. This guide sets out what each type costs, what the installation price should cover, and where you can save without cutting corners.
Comparing Quotes Could Save Up To 33%:
New Boiler Prices By Type
The boiler itself is often the smaller part of the bill. Checkatrade's October 2026 figures put the average supply price of a standard gas boiler at around £1,500, whichever type you choose, with installation adding £1,000 to £2,000.
| Boiler type | Average supply cost | Typical fitted price | Best for |
|---|---|---|---|
| Combi boiler | about £1,500 | £2,500 to £4,000 like for like | Most flats and small to medium homes |
| System boiler | about £1,500 | Usually more than a combi, as a cylinder is needed | Homes with two or more bathrooms |
| Conventional (heat only) boiler | about £1,500 | Usually more than a combi, with tanks and cylinder | Older homes keeping their existing system |
| LPG boiler | about £1,500 | Similar to gas, plus tank arrangements | Off gas grid homes |
| Biomass boiler (manual fed) | about £10,000 | Much higher; fuel store needed | Rural homes with space |
Combi boilers
A combi heats water instantly from the mains as you use it, so there is no hot water cylinder or loft tank. That saves space and makes installation simpler, which is why combis are the most popular choice in the UK. The catch is that flow rate is shared: run a shower and a kitchen tap at once and both suffer. In a home with one bathroom, that is rarely a problem.
System boilers
A system boiler heats a separate hot water cylinder, usually in an airing cupboard. Because water is stored, several taps and showers can run at the same time. Checkatrade notes that replacing a system boiler with a combi costs around £4,000 on average, because the cylinder comes out and pipework changes.
Conventional boilers
Also called regular or heat only boilers, these work with a hot water cylinder and cold water tanks in the loft. They suit older properties with existing tanks and low mains pressure. Replacing a conventional boiler with a combi averages about £4,000, according to Checkatrade, because the tanks and cylinder need removing and the system may need upgrading to cope with mains pressure.
Oil and electric boilers
Homes off the gas grid often run oil boilers. They work much like gas boilers but need an oil tank and an OFTEC registered engineer rather than Gas Safe. Replacing an oil boiler like for like is broadly similar in complexity to a gas swap, but tank replacements, bunding rules and the boiler's location can add a lot. If you are on oil, look hard at a heat pump: the Boiler Upgrade Scheme pays £9,000 towards one in eligible off gas grid homes replacing oil or LPG until 31 March 2027.
Electric boilers have no flue, no gas supply and almost no maintenance. They are useful in flats where a flue is impossible. The drawback is running cost: they turn one unit of electricity into roughly one unit of heat, and electricity costs 26.32p per kWh under the current price cap against 7.97p for gas, so heating a whole house with one is expensive.
Choosing The Right Boiler For Your Home
| Your home | Usually the best fit | Why |
|---|---|---|
| Flat or small house, one bathroom | Combi | No cylinder or tanks, simple to fit |
| Three or four bed house, one bathroom plus en suite | Larger combi or system boiler | Depends on how often showers run at once |
| Large house, two or more bathrooms | System boiler with unvented cylinder | Stored hot water to several outlets at once |
| Older house with low mains pressure | Conventional or system | A combi relies on good mains flow |
| Home with solar panels | System boiler | A cylinder can store spare solar power through a diverter |
| Off gas grid | Heat pump, or oil or LPG boiler | Compare running costs and the grant |
Mains water pressure and flow rate matter for combis. A good installer will measure the flow at your kitchen tap before recommending one. If flow is weak, a combi will disappoint however big it is.
What Installation Costs
Labour and parts usually account for £1,000 to £2,000 of the total on a standard job. A simple like for like combi swap can be done in a single day; Checkatrade suggests 4 to 6 hours for a straightforward installation. Anything more involved takes longer.
| Job | Typical cost |
|---|---|
| Like for like combi swap, same position | £2,500 to £4,000 all in |
| System or conventional to combi | about £4,000 all in |
| Installation labour on a standard boiler | £1,000 to £2,000 |
| Magnetic system filter, supply | £60 to £160 |
| Magnetic system filter, fitting | £50 to £150 |
| Wi-fi heating controller | about £150 |
Things that add to the price
- Moving the boiler. New gas pipe, flue and condensate routes all take time.
- Changing boiler type. Removing tanks and cylinders, capping pipes and making good.
- Flue alterations. Building regulations set strict rules on where a flue can exit. A new position may need a vertical flue through the roof.
- Gas pipe upgrade. Modern boilers need an adequate gas supply. Narrow old pipe may need replacing.
- Powerflush or chemical clean. Sludge in old systems shortens a new boiler's life. Many installers insist on cleaning the system first.
- Condensate pipe. Condensing boilers produce acidic water that must drain away. External runs need to be insulated or sized to avoid freezing.
- Removing a back boiler. Older homes with a boiler behind the fireplace need extra work. See our back boiler removal guide.
- Radiator replacement. If radiators are failing, it can make sense to replace some at the same time.
What should a good quote include?
- Make and model of boiler, its output in kW and the warranty length.
- Removal and disposal of the old boiler.
- System flush or clean and a magnetic filter.
- Controls, including what extra efficiency measure is being fitted.
- Flue kit and any extensions.
- Building regulations notification and the Gas Safe certificate.
- VAT, clearly shown.
Boiler Brands
The UK market is dominated by a handful of manufacturers. Worcester Bosch, Vaillant, Ideal, Baxi and Viessmann are the names most installers fit, alongside others such as Glow-worm, Alpha and Intergas. Prices vary within each brand depending on output and range.
Rather than fixating on the badge, look at:
- Warranty. Many manufacturers offer longer warranties when the boiler is fitted by an accredited installer and serviced every year. Check what the warranty requires.
- Installer familiarity. An engineer who fits a particular brand every week will usually install it well and know how to get parts quickly.
- Output. A boiler that is too large will cycle on and off and waste energy. Ask how the size was worked out.
- Parts availability. Popular brands are usually easier to repair quickly.
Grants And Help With The Cost
There is no general grant for a new gas boiler. The Boiler Upgrade Scheme only covers heat pumps and, in limited cases, biomass boilers, not gas boilers. If you are replacing your boiler anyway, it is worth comparing the cost of a heat pump with the grant deducted; see our heat pump cost guide.
Some help may be available if you:
- receive certain benefits or have a low income, through energy supplier or council schemes;
- are elderly or disabled and your boiler has failed, through local council support;
- live in Scotland, Wales or Northern Ireland, where separate schemes run.
Be wary of cold calls offering a free boiler. Check any scheme through your council or the official government website before you share details.
Ways To Save On A New Boiler
- Replace like for like where possible. Keeping the same type and position is by far the cheapest option.
- Get at least three quotes. Prices for the same job vary widely between installers.
- Avoid winter emergencies. If your boiler is old and unreliable, replace it in the summer when engineers are less busy and you have time to compare.
- Ask about the warranty. A longer warranty can be worth more than a small saving on the price.
- Do not oversize. A combi sized for a big house will not perform better in a small flat.
- Think about controls. A smart thermostat or weather compensation helps the boiler run efficiently.
- Insulate. Loft insulation and draught proofing cut gas bills whichever boiler you choose.
Regulations You Should Know
- Gas Safe. Anyone working on a gas boiler must be on the Gas Safe Register. Check the engineer's ID card and look them up online.
- Building regulations. A boiler replacement is notifiable work. A Gas Safe engineer can self certify and register it, and you should receive a certificate.
- Boiler Plus in England. A new gas boiler must be at least 92% efficient (ErP) and come with a timer and room thermostat. A new combi in England must also have at least one extra energy saving measure, such as weather compensation, load compensation, a smart thermostat with automation and optimisation, or flue gas heat recovery.
- Carbon monoxide alarm. Building regulations in England require a CO alarm in the room when a new boiler or other fixed combustion appliance is installed, apart from gas cookers.
Boiler vs Heat Pump At A Glance
| New gas combi | Air source heat pump | |
|---|---|---|
| Typical installed price | £2,500 to £4,000 like for like | Median £12,908 before grant (April to June 2026) |
| Grant | None | £7,500 Boiler Upgrade Scheme |
| Net cost | £2,500 to £4,000 | about £5,400 at the median |
| Fuel | Gas at 7.97p per kWh | Electricity at 26.32p per kWh, but 3 to 4 units of heat per unit |
| Hot water | Instant | Stored in a cylinder |
| Annual safety check | Gas safety check recommended | Service recommended; no combustion |
| Typical life | 10 to 15 years | Often quoted at 15 to 20 years |
For many people a boiler is still the cheapest upfront option. If you have space for a cylinder and a reasonably insulated home, it is worth getting a heat pump quote at the same time so you can compare like for like.
Servicing, Warranties And Boiler Cover
Most manufacturers ask for an annual service by a Gas Safe engineer to keep the warranty valid. Skipping it can leave you paying for repairs that should have been free. Keep every service record.
A manufacturer's warranty covers faults with the boiler itself. Boiler cover or a care plan is a separate insurance style product that can cover repairs to the wider system, such as pumps, valves and radiators, and often includes the annual service. Read what is excluded: sludge damage and pre existing faults are common exclusions.
If you rent your home, your landlord must arrange an annual gas safety check by a Gas Safe engineer and give you a copy of the record.
Signs You Need A New Boiler
- It is more than 10 to 15 years old and breaking down more often.
- Parts are becoming hard to find or expensive.
- Your bills have crept up without any change in use.
- The pilot light or flame is yellow rather than blue, or there are soot marks.
- Radiators take a long time to warm up even after bleeding.
- An engineer has classed the boiler as at risk or immediately dangerous.
If your boiler is merely old but works well and passes its annual service, there is no rule saying you must replace it.
Who Fits Boilers?
Most boilers are fitted by Gas Safe registered heating engineers or plumbers. Larger firms may send a team; smaller firms are often one engineer and a mate. Both can do excellent work. What matters is registration, insurance, a clear quote and reviews from local customers.
New Boiler Running Costs
Gas is charged at an average of 7.97p per kWh under Ofgem's price cap from 1 October to 31 December 2026, with a daily standing charge of 29.68p. Ofgem now uses 9,500 kWh a year as typical medium gas use. At that level, a household pays about £757 a year in gas unit charges, plus about £108 in standing charges.
A modern condensing boiler that is set up properly, with the flow temperature turned down so it actually condenses, can trim that compared with an old non condensing model. How much you save depends on how inefficient the old boiler was.
FAQs
How much is a new combi boiler fitted?
A like for like combi swap usually costs £2,500 to £4,000 in total. Moving it or changing from another type typically adds around £1,000 or more.
How long does it take to fit a new boiler?
A straightforward like for like swap often takes 4 to 6 hours. A conversion from a conventional system to a combi usually takes two or three days.
Is it worth replacing a 15 year old boiler?
If it is unreliable or inefficient, usually yes. If it is still working well and passes its service, you can keep it running and plan the replacement on your terms.
Are gas boilers being banned?
Not for existing homes. You can still replace a gas boiler with a new one. Rules for new build homes are moving towards low carbon heating.
Do I need a powerflush?
Not always, but a system clean of some kind is usually required for the manufacturer's warranty. Your engineer will advise based on the condition of the water.
What size boiler do I need?
Combi boilers are often sized by hot water demand, typically 24 to 35 kW for most homes. System and conventional boilers are sized by heating demand. Your installer should calculate it rather than guess.
Can I fit a boiler myself?
No. Any work on gas appliances must be carried out by a Gas Safe registered engineer. It is illegal for anyone else to do it, and an unregistered installation will void the warranty and may invalidate your home insurance.
Should I replace radiators at the same time?
Only if they are leaking, corroded or not heating properly after bleeding and balancing. Doing it alongside the boiler saves a second drain down of the system, so it is worth asking your engineer to check them on the survey.
Does a new boiler need a new flue?
Almost always. Flues are matched to the boiler model, and the old one will not usually fit. The flue kit is normally included in the quote, but extensions or a roof exit cost more.
Get Quotes
The best way to find a fair price is to compare. Use the form at the top of this page to get up to three quotes from local Gas Safe engineers, then check each one includes the same boiler, warranty, controls, filter and flush.
Checked October 2026. Sources: Checkatrade new boiler cost guide and boiler installation cost calculator (last updated October 2026); WhatPrice combi boiler cost data; Ofgem Boiler Upgrade Scheme guidance; Ofgem energy price cap 1 October to 31 December 2026 and typical domestic consumption values; GOV.UK Boiler Plus guidance; Approved Document J.