Compare Quotes & Save up to 33%

Compare Quotes & Save up to 33%

Get up to 3 quotes from pros in your postcode

1. Do you require a local driveway installer?*

Powered by Bark.com

Resin Driveway Cost 2026: Bound & Bonded Prices Per m2

A resin bound driveway costs about £120 per square metre all in, according to Checkatrade's 2026 guide, made up of around £70 per m2 for materials and £50 per m2 for installation. That puts a medium two car drive of 50 m2 at about £6,000. Where a sound existing base can be reused, installer quotes are often lower, commonly £40 to £70 per m2, rising to £70 to £90 per m2 when a new sub base is needed. Resin bonded surfaces, a different and cheaper system, typically cost around £25 to £45 per m2.

Teal graphic with a house outline and the words Resin Driveway Cost Bound and Bonded Prices Per m2

The biggest factor is what lies underneath. Resin is a thin wearing layer, and it is only as good as the base it sits on. This guide compares bound and bonded resin, explains base preparation, and covers lifespan, maintenance and the planning rules for front gardens.

Comparing Quotes Could Save Up To 33%:

→ Click To Get Quotes

Price Per m2

By driveway size

Checkatrade's figures (last updated June 2026) assume a complete installation. Labour per square metre falls as the area grows, because setup time is spread over more ground.

Driveway size Materials per m2 Labour per m2 Typical total
Small, single car, 20 m2 £70 £70 about £2,800
Medium, two cars, 50 m2 £70 £50 about £6,000
Large, multiple cars, 100 m2 £70 £30 about £10,000

By installation type

Installation Typical price per m2 Notes
Resin bound over a sound existing base about £40 to £70 Existing tarmac or concrete in good condition, no excavation
Resin bound with a new sub base about £70 to £90 Dig out, new stone base and binder course
Checkatrade all in average about £120 Materials and installation
Resin bonded about £25 to £45 Stones scattered onto a resin coat; not permeable

These ranges come from installer price guides and Checkatrade, checked October 2026. Our existing new driveway guide quotes resin at £65 to £85 per m2 for small drives, which sits in the middle of these figures. You may also want to read our original resin driveway guide, which covers materials in more depth.

Compared with other driveway materials

Checkatrade's April 2026 comparison of all in prices per m2:

Material Materials per m2 Installation per m2 Total per m2
Gravel £30 £30 £60
Tarmac £50 £40 £90
Concrete £50 £45 £95
Brick £48 £50 £98
Block paving £50 £50 £100
Resin bound £70 £50 £120

Resin bound sits at the top of the range for a full installation, but it can undercut block paving when laid over a sound existing base. See our guides to tarmac driveways and block paving for those options.

Bound vs Bonded

The names are similar, but the systems are very different.

Resin bound Resin bonded
How it is made Aggregate and resin mixed together, then trowelled smooth Resin spread on the base, loose stones scattered on top
Finish Smooth, even, no loose stones Textured, like a gravel finish that stays put
Permeable? Yes; water drains through tiny gaps No; water runs off the surface
Planning for front drives Usually not needed, because it is permeable May need permission or drainage over 5 m2
Typical cost Higher Lower
Maintenance Sweep and occasional wash Some loose stones can come away over time

Most people asking for a "resin driveway" mean resin bound. If a quote looks unusually cheap, check which system it is.

UV stable resin

Resin comes in UV stable and non UV stable forms. Checkatrade notes that non UV stable resin can discolour in sunlight, leaving marks where bins or pots have stood, and is harder and more brittle. UV stable resin resists fading and is more flexible, but Checkatrade says it can cost almost twice as much. For a driveway in full sun, UV stable is generally worth it.

Base Preparation

A resin bound surface is typically laid around 15 to 25 mm thick, so it cannot hide a poor base. Cracks, soft spots and movement underneath will come through.

Laying over an existing surface

Resin can go over existing tarmac or concrete if it is:

  • Sound, with no significant cracks or crumbling.
  • Stable, with no sinking or movement.
  • Free of oil and contaminants, which stop the resin bonding.
  • Graded to drain properly, and permeable or drained if you need the finished drive to be permeable.

Small cracks may be repaired; widespread damage means a new base.

Building a new base

A full installation usually involves:

  1. Excavating the old surface and soil to the required depth.
  2. Laying and compacting a sub base of crushed stone.
  3. Laying a binder course, often open graded porous tarmac or porous concrete.
  4. Installing edging to hold the resin, such as block, brick or metal edging. Checkatrade notes resin must be laid up to a stable edge.
  5. Mixing and trowelling the resin and aggregate in batches.
  6. Curing before use.

Ask each installer what base they propose and why. That is the line where cheap quotes save money.

Lifespan

With proper installation and maintenance, Checkatrade expects a resin bound driveway to last 15 to 20 years. The base, the quality of resin, UV stability and how heavily the drive is used all affect this.

Curing times

Checkatrade advises that a new resin bound drive can be walked on after about 24 hours and driven on by smaller vehicles after about 72 hours. Rain on uncured resin can leave a cloudy finish, so most installers prefer to work in dry, mild weather.

Maintenance

  • Sweep regularly to remove leaves and grit, which helps stop moss.
  • Clean up oil and other spills quickly.
  • Wash occasionally. Checkatrade suggests a fan nozzle, low pressure and cool to warm water if using a pressure washer.
  • Avoid harsh chemicals and wire brushes.
  • Avoid sharp turning of stationary wheels on a new drive.

Planning Rules

Planning rules for front gardens in England are set out in permitted development guidance:

  • You do not need planning permission for a new or replacement driveway of any size if it uses permeable or porous surfacing, such as resin bound, or if rainwater is directed to a lawn or border to drain naturally.
  • If the surface is impermeable, such as resin bonded on a solid base, and it covers more than 5 m2 with water running onto the road, you will need planning permission.
  • A dropped kerb onto a public road needs separate permission from your council's highways department.

Listed buildings, conservation areas and flats can have tighter rules, and rules differ in Wales, Scotland and Northern Ireland. Check with your council if in doubt.

Worked Example

Say you have a 40 m2 front garden, currently a mix of old concrete and lawn, and you want a resin bound drive for two cars.

Because the old surface is mixed and partly soft ground, the installer will need to dig out and lay a new base. At the new sub base rate of about £70 to £90 per m2, the resin surface and base come to roughly £2,800 to £3,600. On top of that you might add new edging along the boundary, removal of the old concrete in skips, and possibly a channel drain if the drive slopes towards the house. Using Checkatrade's all in figure of £120 per m2 instead gives £4,800, a reminder that quotes vary widely. Getting three detailed quotes is the only way to know where your job sits.

If the same 40 m2 were already a sound tarmac drive, the installer could lay resin straight over it, and the price could fall to roughly £1,600 to £2,800.

Choosing Aggregate And Colour

Resin bound surfaces use natural or recycled stone in a wide choice of colours, from pale silver and buff blends to darker greys and golds. A few points to consider:

  • Stone size. Smaller aggregates give a smoother, tighter finish; larger stones look more textured and need a thicker layer. Checkatrade notes larger aggregates also need deeper excavation, which adds labour.
  • Blends. Mixed colour blends hide dirt, tyre marks and leaves better than a single pale colour.
  • Matching the house. Warm buff and gold tones suit red brick; cooler silver and grey blends suit render and modern homes.
  • Anti slip additives. Checkatrade says the aggregate should include materials such as glass or translucent sand for grip once the initial resin film wears.

Ask to see a sample panel outdoors, as colours look different in daylight and when wet.

Common Problems

Problem Likely cause
Cracks appearing Unstable or cracked base, or brittle non UV stable resin
Patchy colour or yellowing Non UV stable resin in sunlight
Cloudy or milky finish Rain or moisture during curing
Loose stones Poor mixing, wrong ratio of resin, or a bonded system wearing
Puddling Base not permeable, or blocked pores from dirt and moss

Most of these trace back to installation. That is why the installer's experience and specification matter more than the headline price.

Pros And Cons

Pros Cons
Smooth, modern finish with no loose stones Higher cost for a full installation
Permeable and SuDS compliant when bound Only as good as the base underneath
Low maintenance Non UV stable resin can discolour
Suits slopes better than loose gravel Weather dependent installation
Wide choice of colours and aggregates Repairs can show colour differences

How To Choose An Installer

There are no official regulations governing resin bound installation, so quality varies. Look for:

  • Plenty of local examples you can visit, ideally a few years old.
  • A clear specification: base, binder course, resin type (UV stable or not), aggregate size and depth.
  • A written guarantee covering both materials and workmanship.
  • Membership of a recognised trade body or checked directory.
  • No pressure selling or large upfront deposits.

FAQs

How much does a 50 m2 resin driveway cost?

About £6,000 at Checkatrade's all in average of £120 per m2. Laying over a sound existing base can be cheaper.

Is resin cheaper than block paving?

At Checkatrade's averages, a full resin bound installation costs slightly more per m2 than block paving (£120 against £100). Laid over an existing base, resin can be cheaper.

Can resin go on a slope?

Yes. Checkatrade notes resin is often considered one of the best materials for sloping drives because there are no loose stones to wash down.

Do resin driveways crack?

They can if laid over an unstable or cracked base, or if a brittle non UV stable resin is used. Good preparation is the best prevention.

Can you lay resin over block paving?

It is not usually recommended, because block paving can move and the joints may show through.

How long does it take to install?

Many domestic drives are laid in one to three days, depending on whether a new base is needed, plus curing time.

Is a resin driveway worth the money?

For many homes, yes. It looks smart, drains well, avoids loose gravel and needs little upkeep. It is less good value if your base needs a lot of work and you are happy with a simpler finish such as tarmac or gravel.

Get Quotes

Use the form at the top of this page to get quotes from local driveway installers. Ask each for a written specification so you can compare the base, resin and guarantee, not just the price.

Checked October 2026. Sources: Checkatrade resin bound driveway cost guide (prices updated April and June 2026); installer price guides; GOV.UK guidance on permeable surfacing for front gardens.